Model NO.: HZ-006
Maxcapacity: Max Load:300 Kn
Load Way: Hydraulic Load
Oil Cylinder Position: Under
Test Force Measuring Range Kn: 4%-100%Fs
Piston Stroke: 80mm
Motor Power: 3 Phase 0.75 Kw
Outside Size: 850*620*1340mm
Net Weight: 400kg
Transport Package: Packaged by Standard Export Wooden Case
Origin: China(Mainland), Guangdong
Type: Universal Testing Machine
Accuracy Grade: 0.5
Loading Method: Hydraulic Loading
Control: Manual Control
Power Source: AC380V
Max Load: 300kn
Hydraulic Pump Rated Pressure: 27mpa
Piston Diameter: 130mm
Bearing Compress Plate Size: 155mm
Resist Bending Roll Diameter: 32mm
HS Code: 9024101000
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test, can also be used to test the mechanical properties of other materials.
The oil tank is sucked through the filter screen and be inhaled pump oil, through the petroleum pipeline of oil pump transport to oil valve, When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.
This machine adopts hydraulic loading, electronic measuring, with a load of figures, the loading rate shows that the maximum load to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Whole set fixtures include:A set compression platen fixture
|Max load KN||100kN(resist|
|302kN(resist bend and compress)|
|Test force measuring range KN||4%-100%FS|
|Test Force showed the relative error||≤indicating value±1%|
|Test Force Resolution||0.01kN|
|Hydraulic pump rated pressure||27MPa|
|Bearing compress plate size||φ155mm|
|Maximum distance between the upper and lower plate||230mm|
|Resist bending roll diameter||φ32mm|
|Maximum distance between the upper and lower resist bending rollers||165mm|
|between two bending rollers upon the center distance||150mm|
|between two bending rollers under the center distance||450mm|
|Motor Power||3 phase 0.75 kW|
|Outside dimension mm||850×620×1340mm|
- Principle Of The Test Pump
- Testing Pump Maintenance
- Pump Selection Principles: Economic...
- Pump Selection Method (process)
- Standard Type Characteristics Of Ga...
- Standard Pressurized Cylinder Features
- Consumption Of Gas Booster Valve Pr...
- Pneumatic Pressure Cylinder Suddenl...
- Causes Abnormal Vibration Of Centri...
- Centrifugal Pump Why Return?
- Lube Oil Filtration System for Lube...
- Rotary Piston Vacuum Pump Systems w...
- Hydraulic Automatic Pressure Testin...
- Electro Hydraulic Pressure Universa...
- Electro Hydraulic Building Material...
- Pipeline Electric Fire Fighting Wat...
- Low Cut Model: Ws-Ah 80-1000 Bar Ai...
- Closed Cabinet Portable Ws-Js 100-2...
- Hydrostatic Pipe Tester-Plastic Pip...
- Flipped Double Hold Pressure Valve ...