Model NO.: HZ-006
Maxcapacity: Max Testing Force:302 Kn
Load Way: Mechanical Load
Oil Cylinder Position: Under
Test Force Measuring Range Kn: 4%-100%Fs
Hydraulic Pump Rated Pressure: 27mpa
Piston Diameter: 130mm
Motor Power: 3 Phase 0.75 Kw
Net Weight: 400kg
Transport Package: Wooden Case
Type: Universal Testing Machine
Accuracy Grade: 0.5
Loading Method: Dynamic Load
Control: Manual Control
Power Source: AC380V
Max Load Kn: 100kn/300kn/302kn
Test Force Resolution: 0.01kn
Resist Bending Roll Diameter: 32mm
Piston Stroke: 80mm
Outside Dimension Mm: 850*620*1340mm
HS Code: 9024101000
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test, can also be used to test the mechanical properties of other materials.
The oil tank is sucked through the filter screen and be inhaled pump oil, through the petroleum pipeline of oil pump transport to oil valve, When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.
This machine adopts hydraulic loading, electronic measuring, with a load of figures, the loading rate shows that the maximum load to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Whole set fixtures include: A set compression platen fixture
|Max load KN||100kN(resist|
|302kN(resist bend and compress)|
|Test force measuring range KN||4%-100%FS|
|Test Force showed the relative error||≤indicating value±1%|
|Test Force Resolution||0.01kN|
|Hydraulic pump rated pressure||27MPa|
|Bearing compress plate size||155mm|
|Maximum distance between the upper and lower plate||230mm|
|Resist bending roll diameter||32mm|
|Maximum distance between the upper and lower resist bending rollers||165mm|
|between two bending rollers upon the center distance||150mm|
|between two bending rollers under the center distance||450mm|
|Motor Power||3 phase 0.75 kW|
|Outside dimension mm||850×620×1340mm|
- Principle Of The Test Pump
- Testing Pump Maintenance
- Pump Selection Principles: Economic...
- Pump Selection Method (process)
- Standard Type Characteristics Of Ga...
- Standard Pressurized Cylinder Features
- Consumption Of Gas Booster Valve Pr...
- Pneumatic Pressure Cylinder Suddenl...
- Causes Abnormal Vibration Of Centri...
- Centrifugal Pump Why Return?
- Pipeline Electric Fire Fighting Wat...
- Low Cut Model: Ws-Ah 80-1000 Bar Ai...
- Closed Cabinet Portable Ws-Js 100-2...
- Hydrostatic Pipe Tester-Plastic Pip...
- Flipped Double Hold Pressure Valve ...
- Salable Electrical Hydrostatic Pres...
- Yaw Series Microcomputer Controlled...
- Pipe Hydraulic Pressure Test Equipm...
- 0-30t Hydraulic Pressure Strength T...
- Color Steel Plate Forming Machine