Suncenter Fluid Control Equipment Co., Ltd

Expert of high pressure pumps and systems.

Focusing on high pressure fluid field for over 15 years.

Liquid Co2 Pump For Fire Extinguisher Cylinder Transfer And Filling

Liquid Co2 Pump For Fire Extinguisher Cylinder Transfer And Filling

Pneumatic (Air compressor driven) liquid CO2 filling pumps/equipment Compressed Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series. SUNCENTER pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to...

Send InquiryChat Now
Product Details

Pneumatic (Air compressor driven) liquid CO2 filling pumps/equipment

 

Compressed Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.
SUNCENTER pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

 

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.


Key features include:

 Compressed Air driven - no electricity required (connect to normal air compressor)
 In order to extend the lifetime of the pump, the driving air pressure should 
not be higher than 8 bar
 No airline lubricator required 
 Wide range of models with different ratios
 Built-in-cooling on most models 
 Easy to install, operate and maintain
 Best price / performance ratio 
 No heat, flame or spark risk and explosion proof 
 Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

 

 

 


DGG Series Liquid CO2 Booster Pumps

 

QQ20180806171545.png


Technical specification

 

QQ20180806172234.png 

 

DGGD Series Liquid CO2 Pumps(Double acting)

 

QQ20180806171610.png


Technical specification

QQ20180806172456.png


Max. outlet pressure at an air drive of 8 bar/116 PSI
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

 

 

Suncenter DGS Series Pneumatic (Air driven) CO2 filling pump system 
CO2 Fire Extinguisher filling equipment

 

SUNCENTER- CO2 filling pump systems are compact and delicacy solution tailored to customer specific requirements with air driven pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.
To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. 
As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven pump have to be equipped with the air control unit combined filter, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

 

QQ20180806171636.png


DGS booster system = booster pump+ following valves, gages, and parts

 

 

 QQ20180806171704.png

 

 

 

The hottest selling- Model C cabinet picture

QQ20180806171738.png

 

 

The standard CO2 gas booster pumps system including following parts:
Air –driven liquid CO2 gas booster pump
Stainless steel (carbon steel) material cabinet 
F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
Driven air switch (Pump starting switch), driven air pressure gauge
Gas inlet switch, Gas inlet pressure gauge
Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
And we could also customize it according to clients’ special requirement.


Should the liquid co2 pump for fire extinguisher cylinder transfer and filling caters to your requirement, welcome to buy the equipment with our factory. Well-known as one of the professional manufacturers and suppliers, we're equipped with a productive factory to produce the best quality equipment for you.
Hot Tags: liquid co2 pump for fire extinguisher cylinder transfer and filling, manufacturers, suppliers, factory
Related Products
Inquiry