Suncenter Fluid Control Equipment Co., Ltd

Expert of high pressure pumps and systems.

Focusing on high pressure fluid field for over 15 years.

Helium/Hydrogen/CO2/oxygen/nitrogen/natural gas booster pump

Helium/Hydrogen/CO2/oxygen/nitrogen/natural gas booster pump

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi).

Send InquiryChat Now
Product Details

Helium/Hydrogen/CO2/oxygen/nitrogen/natural gas booster pump

Here below is the working video of Liquid CO2 pumps.

https://youtu.be/rBq1cFtB48M   


Here below is the working video of  SLM06 model refrigerant pump.  

https://youtu.be/lNK5EXVwTJI   


And here below is  the working video of gas booster pump:(DGD  series)

https://www.youtube.com/watch?v=Ta-LMTcaF8g&feature=youtu.be

 

And here below is the working video of gas booster pump:(DGT  series)

https://youtu.be/kNJIDTkdOHk


Herebelow is the working video of DGS series gas booster system(in Model A  blue cabinet).


https://youtu.be/mDlOnlYzRiA    


Herebelow is the video of DGS series gas booster system(in Model C frame  cabinet). 

https://youtu.be/KNIFv-m4-HY


Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series 

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include: 

·Compressed Air driven - no electricity required (connect to normal air compressor)

·In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

·No airline lubricator required 

·Hydrocarbon free - separation between air and gas sections 

·Pressures to 80Mpa (11,600 psi)  

·Wide range of models with different ratios

·Built-in-cooling on most models 

·Easy to install, operate and maintain

·Best price / performance ratio 

·No heat, flame or spark risk and explosion proof 

·Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

·Applicable gas: Argon/Helium/Hydrogen/Oxygen/NO2/CH4/LNG/LPG/CNG/FM200 etc.


Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.


Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.


As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities. 


SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances. 


Applications 

·Pressure test with gas

·Gas transfer and filling

(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)

·Charging of gas cylinder and accumulator with nitrogen

·Supply for isolating gas systems

·Gas assisted injection molding

·Transfer of oxygen cylinders

·Charging of breathing air bottles

·Leak test 

·Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components

·Safety valve adjusting 

DGA series gas booster pumps(Single acting, single air drive head): 

DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel. 

图片22.jpg

Technical spcification

Model

Pressure 

boost ratio

Min. gas Inlet 

pressure
PA (bar)

Max.gas
Inlet 

pressure
PA (bar)

Max. gas
outlet pressure 

PB (bar)

 

Driven air pressure  PL

Formula to
calculate gas outlet pressure PB

Connection:
Gas Inlet /
Gas outlet (NPT thread)

Max. flow at driven air pressure of 6bar (L/min)

DGA02

2:1

1.0

16

16

3-8 bar

2X PL

1/2 / 1/2

960 (at PA of 6 bar )

DGA05

5:1

1.5 

40

40

3-8 bar

5XPL

1/2 / 1/2

680(at PA of 6 bar )

DGA06

6:1

2.0

48

48

3-8 bar

6XPL

1/2 / 1/2

360(at PA of 10 bar )

DGA10

10:1

3.5

80

80

3-8 bar

10XPL

3/8/ 3/8

210(at PA of 10 bar )

DGA25

25:1

7.0 

200

200

3-8 bar

25XPL

1/4/ 1/4

120(at PA of 20 bar )

DGA40

40:1

10

320

320

3-8 bar

40XPL

1/4/ 1/4

200(at PA of 40 bar )

DGA60

60:1

20 

480

480

3-8 bar

60XPL

1/4/ 1/4

180(at PA of 40 bar )

DGA100

100:1

25

800

800

3-8 bar

100XPL

1/4/ M14X1.5

136(at PA of 40 bar )

Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar


DGD series gas booster pumps(Double acting ):

DGD series pumps are double acting, single stage with double air driven heads type.   

·DGD pumps are available with high quality seals, which provide significantly better service life

·Double pump heads with exhaust cooling devices. 

·All components in contact with the gas are made of stainless steel. 

·Pipes mounting way are available as customized. 

图片23.jpg

Technical specification

Model

Pressure 

boost ratio

Min. gas

Inlet 

pressure
PA (bar)

Max.gas
Inlet 

pressure
 PA (bar)

Max. gas
outlet pressure 

PB (bar)

 

Driven air pressure  PL

Formula to
calculate gas outlet pressure PB

Connection:
Gas Inlet /
Gas outlet (NPT thread)

Max. flow at driven air pressure of 6bar (L/min)

DGD10

10:1

3.5

80

80

3-8 bar

10XPL+ PA

3/8/3/8

410(at PA of 6 bar )

DGD25

25:1

10

200

200

3-8 bar

25XPL+ PA

1/4/1/4

396(at PA of 20 bar )

DGD40

40:1

15

320

320

3-8 bar

40XPL+ PA

1/4/1/4

320(at PA of 40 bar )

DGD60

60:1

25

480

480

3-8 bar

60XPL+ PA

1/4/1/4

215(at PA of 40 bar )

DGD100

100:1

35

800

800

3-8 bar

100XPL+ PA

1/4/M14*1.5

300(at PA of 60 bar )

DGD130

130:1

50 

1040

1040 

3-8 bar

130XPL+ PA

1/4/M14*1.5

180(at PA of 60 bar )

Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 ba


DGT series gas booster pumps(Double acting, double stage, single air drive head ):


DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure. 

·DGT pumps are available with high quality seals, which provide significantly better service life 

·Double pump heads with exhaust cooling devices. 

·All parts in contact with the gas are made of stainless steel.

图片24.jpg

Technical specification

Model

Pressure 

boost ratio

Min. gas
Inlet 

pressure
 PA (bar)

Max.gas
Inlet 

pressure
PA (bar)

Max. gas
outlet pressure 

PB (bar)

 

Driven air pressure  PL

Formula to
calculate gas outlet pressure PB

Connection:
Gas Inlet /
Gas outlet (NPT thread)

Max. flow at driven air pressure of 6bar (L/min)

DGT25

25:1

1

10

200

3-8 bar

25XPL+3.5XPA

3/8/ 1/4

136(at PA of 8 bar )

DGT40

40:1

1

10

320

3-8 bar

40XPL+ 6XPA

3/8/ 1/4

124(at PA of 8 bar )

DGT10/60

10:1/60:1

1

10

480

3-8 bar

60XPL+6X PA

3/8/ 1/4

84(at PA of 8 bar )

DGT25/60

25:1/60:1

10

25

480

3-8 bar

60XPL+2.5XPA

3/8/ 1/4

80(at PA of 15 bar )

DGT100

100:1

1

10

800

3-8 bar

100XPL+10XPA

3/8/ M14*1.5

63(at PA of 8 bar )

Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  

In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar

Should the gas booster pumps caters to your requirement, welcome to buy the equipment with our factory. Well-known as one of the professional manufacturers and suppliers, we're equipped with a productive factory to produce the best quality equipment for you.




Pneumatic (Air compressor driven) gas booster pump system


Suncenter - Gas booster systems are compact and delicacy solution tailored to customer specific requirements with gas boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet. 
To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. 
The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. 
Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor).

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

 


Applications
 Pressure test with gas
 Gas transfer and filling
(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
 Charging of gas cylinder and accumulator with nitrogen
 Supply for isolating gas systems
 Gas assisted injection molding
 Transfer of oxygen cylinders
 Charging of breathing air bottles
 Leak test 
 Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components
Safety valve adjusting


Suncenter DGS Series Pneumatic (Air driven) Gas Booster Pump System

 

QQ20180808111834.png


DGS booster system = booster pump+ following valves, gages, and parts

 

QQ20180808111911.png

 

The hottest selling- model A and model C cabinet picture

 

QQ20180808112104.png

 

 

The standard gas booster pumps system including following parts:

 

Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)

Stainless steel (carbon steel) material cabinet (Three models for choosing)

F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)

Driven air switch (Pump starting switch), driven air pressure gauge

Gas inlet switch, Gas inlet pressure gauge

Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.

And we could also customize it according to clients’ special requirement.

 

 

Technical specification for DGS-DGA series

QQ20180808134241.png

Note: PL: driven air pressure PA: gas inlet pressure PB: gas outlet pressure 
In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar


Technical specification for DGS-DGD series

QQ20180808134602.png

 

Note: PL: driven air pressure PA: gas inlet pressure PB: gas outlet pressure 
In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar

 



Technical specification for DGS-DGT series

 

QQ20180808134931.png

Note: PL: driven air pressure PA: gas inlet pressure PB: gas outlet pressure 
In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar




201804040928129479741.jpg


201804040928121294305.jpg





Related Products
Inquiry