Suncenter Fluid Control Equipment Co., Ltd

Expert of high pressure pumps and systems.

Focusing on high pressure fluid field for over 15 years.

Suncenter Max 10000 Psi Pressure Air Booster

Suncenter Max 10000 Psi Pressure Air Booster

Pneumatic (Air compressor driven) air booster pumps/system Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the...

Send InquiryChat Now
Product Details

Pneumatic (Air compressor driven) air booster pumps/system



Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

 

1.png


* technical parameters
Driven source: clean compressed air
Air pressure control system
Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)
Boost Ratio:2:1
Maximum flow rate : 580L/min
Maximum air output pressure: 16bar.
Applicable medium: clean air
Air inlet minimum pressure: 1bar
Suncenter DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

 

2.png


* technical parameters
Driven source: clean compressed air
Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)
Boost Ratio:2:1
Maximum flow rate : 1600L/min
Maximum air output pressure: 16bar.
Applicable medium: clean air
Air inlet minimum pressure: 1bar

 

 


Suncenter DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.

 

 

3.png

* technical parameters
Driven source: clean compressed air
Air pressure control system
Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)
Boost Ratio:3:1
Maximum flow rate : 420L/min
Maximum air output pressure: 24bar.
Applicable medium: clean air
Air inlet minimum pressure: 1bar

 

Suncenter DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

 

4.png

 

 


* technical parameters
Driven source: clean compressed air
Air pressure control system
Drive compressed air pressure: 2-8bar (recommended drive pressure <8bar)
Boost Ratio:5:1
Maximum flow rate : 820L/min
Maximum air output pressure: 40bar.
Applicable medium: clean air
Air inlet minimum pressure: 2bar

Characteristics :
It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.



Technical spcification

 

AITJJXC60CL1C)ZOH}5Q35X.png 

 

DGS-DGMA02 air pressure booster system
The system including: DGMA02 air booster pump,
F.R.L combination (adjust driven air pressure+ filter+ lubricant)
Air tank (20L/40L),Driven air switch, high pressure needle valve,
high pressure gauge, reducing valve

 

 

 5.png

 

 

DGS-DGVA02 air pressure booster system
The system including: DGVA02 air booster pump,
F.R.L combination (adjust driven air pressure+ filter+ lubricant)
Air tank (20L/40L),Driven air switch, high pressure needle valve,
high pressure gauge, reducing valve

 

 

 6.png

 

 

 

DGS-DGVA05 air pressure booster system
The system including: DGVA05 air booster pump,
F.R.L combination (adjust driven air pressure+ filter+ lubricant)
Air tank (20L/40L),Driven air switch, high pressure needle valve,
high pressure gauge, reducing valve

 

 7.png

 

 



Pneumatic (Air driven) gas booster pumps/system


Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:

Compressed Air driven - no electricity required (connect to normal air compressor)
 In order to extend the lifetime of the pump, the driving air pressure should 
 not be higher than 8 bar
 No airline lubricator required 
 Hydrocarbon free - separation between air and gas sections 
 Pressures to 80Mpa (11,600 psi) 
 Wide range of models with different ratios
 Built-in-cooling on most models 
 Easy to install, operate and maintain
 Best price / performance ratio 
 No heat, flame or spark risk and explosion proof 
 Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant
 Applicable gas: Argon/Helium/Hydrogen/Oxygen/NO2/CH4/LNG/LPG/CNG/FM200 etc.

 

Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities.


Applications

 Pressure test with gas
 Gas transfer and filling
(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
 Charging of gas cylinder and accumulator with nitrogen
 Supply for isolating gas systems
 Gas assisted injection molding
 Transfer of oxygen cylinders
 Charging of breathing air bottles
 Leak test 
 Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and  tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft  components
 Safety valve adjusting

 

QQ20180803153310.png

 

 


DGA series gas booster pumps(Single acting, single air drive head): 
DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel.

 

QQ20180803153332.png

 

Technical spcification


QQ20180803161853.png

Note: PL: driven air pressure PA: gas inlet pressure PB: gas outlet pressure 
In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar



How to Select Suncenter Air Driven Gas Boosters/Systems?

In order to choose suitable booster pump or systems for you,

please kindly reply us the following questions:

1.What is your present gas pressure?(    )bar

2.What is your gas?oxygen gas,nitrogen gas or other gases?

3.What outlet gas pressure do you want?(    )bar

4.What driven air pressure (of your air compressor) can you offer?(    )bar,

because our booster is completely air operated and no need any electricity

5.What outlet gas flow rate do you need?(    )L/min


Should the suncenter max 10000 psi pressure air booster caters to your requirement, welcome to buy the equipment with our factory. Well-known as one of the professional manufacturers and suppliers, we're equipped with a productive factory to produce the best quality equipment for you.
Hot Tags: suncenter max 10000 psi pressure air booster, manufacturers, suppliers, factory
Related Products
Inquiry