Suncenter Fluid Control Equipment Co., Ltd

Expert of high pressure pumps and systems.

Focusing on high pressure fluid field for over 15 years.

Hydraulic Pump Power Pack unit

Hydraulic Pump Power Pack unit

SUNCENTER- Hydraulic pump power pack are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

Send InquiryChat Now
Product Details

Hydraulic Pump Power Pack unit

DLS series (Air driven) Hydraulic Power Packs  

SUNCENTER- Hydraulic pump power pack are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.


To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa. 


As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel. 


The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure. 


Key features include: 

·Compressed Air driven - no electricity required (connect to normal air compressor)

·In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

·No airline lubricator required 

·Pressures to 640Mpa (6400 bar)  

·Wide range of models with different ratios

·Built-in-cooling on most models 

·Easy to install, operate and maintain

·Best price / performance ratio 

·No heat, flame or spark risk and explosion proof 

·Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant


The standard Hydraulic pump power pack unit including following parts:

Air –driven liquid booster pump (DGG/DGGD two series for choosing)

Stainless steel (carbon steel) material cabinet (Three models for choosing)

F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)

Driven air switch (Pump starting switch), driven air pressure gauge, water tank

Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.

And we could also customize it according to clients’ special requirement.

图片47.jpg


DLS-GD series Technical specification

Model

Pressure Ratio

Driven air pressure P

Formula to calculate outlet pressure

MAX Outlet
 Pressure(bar)*

Driven
 air inlet  port

High pressure Outlet port

MAX Flow
(L/min)**

DLS-GD4

4:1

3-8 bar

4XPL

32

G 1/2

NPT/ZG

70.00

DLS-GD6

6:1

3-8 bar

6XPL

48

G 1/2

NPT/ZG

48.60

DLS-GD10

10:1

3-8 bar

10XPL

80

G 1/2

NPT/ZG

30.61

DLS-GD16

16:1

3-8 bar

16XPL

128

G 1/2

NPT/ZG

19.73

DLS-GD28

28:1

3-8 bar

28XPL

224

G 1/2

NPT/ZG

11.30

DLS-GD40

40:1

3-8 bar

40XPL

320

G 1/2

NPT/ZG

7.69

DLS-GD64

64:1

3-8 bar

64XPL

512

G 1/2

NPT/ZG

4.94

DLS-GD80

80:1

3-8 bar

80XPL

640

G 1/2

NPT/ZG

3.96

DLS-GD100

100:1

3-8 bar

100XPL

800

G 1/2

NPT/ZG

3.13

DLS-GD130

130:1

3-8 bar

130XPL

1040

G 1/2

NPT/ZG

2.40

DLS-GD175

175:1

3-8 bar

175XPL

1400

G 1/2

NPT/ZG

1.81

DLS-GD255

255:1

3-8 bar

255XPL

2040

G 1/2

NPT/ZG

1.23

DLS-GD400

400:1

3-8 bar

400XPL

3200

G 1/2

NPT/ZG

0.79


Applications include:

· Pressure testing

· Burst(Hydrostatic) testing

· Work holding/power clamping

· Jacking/lifting

· Valve actuator control

· Hydraulic cylinder actuation

· Press safety overload devices

· Roller tensioning

· Metering

· Precision lubrication and spraying

· Liquefied gas transfer


How to Select Suncenter Air Driven Liquid Boosters/Systems?

In order to choose suitable liquid booster pump or systems for you,

please kindly reply us the following questions:

1. What is the liquid you want to booster?

2. What outlet liquid pressure do you want?(    )bar

3. What driven air pressure (of your air compressor) can you offer?(    )bar,

Because our booster is completely air operated and no need any electricity

4. What outlet liquid flow rate do you need?(    )L/min

Should the hydraulic pump power pack caters to your requirement, welcome to buy the equipment with our factory. Well-known as one of the professional manufacturers and suppliers, we're equipped with a productive factory to produce the best quality equipment for you.

Related Products
Inquiry